BDI 6001 Sequel - Manual

1
S
equel
6001 D
esk
a s s e m b l y i n s t r u c t i o n s
bDiusa
.
com customerservice
@
bDiusa
.
com
Designed by Matthew Weatherly.
‘Sequel’ is a trademark of Becker Designed, Inc.
All rights reserved. ©2009 Becker Designed, Inc.
Made in Taiwan. 6001REV121409v5
I - Adhesive Foam/Magnet x 4
Pre-installed on
Upper
Horizontal Beam (N)
G - 1/4-20 x 2 3/8” Screw x 7
H - 1/4-20 x 1/2” Screw x 16
F - 4mm Hex Wrench x 1
Placement and Maintenance
Sequel™ Home Office Furniture is designed for indoor use on level floors. Clean
glass with glass cleaner, and steel parts and wood veneer with a moist cloth. Your
Sequel™ Home Office Furniture is engineered for easy assembly. Carefully follow this
procedure to prevent any damage.
Do not use power tools for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace should be a non-
marring surface such as carpet. For missing hardware pieces, please contact BDI
Customer Service at [email protected]. For all other concerns, please
contact your BDI Retailer.
Component List
6001 6002 6005 5 6 6 6006 6 6 6007 7 6
B - Top Glass x 1
D - Front Kick Panel x 1
C - Back Panel x 1
L - Right Leg x 1
K - Left Leg x 1
M - Glides x 4
A - Drawer Assembly x 1
E - Lower Horizontal Beam x 1
N - Upper Horizontal Beam x 1