BDI 8227-2 MIRAGE - Manual

1
C - Assembled Cabinet
x 1
Mirage is engineered for easy assembly. Carefully follow this procedure
to prevent any damage.
Placement and Maintenance
Mirage is designed for indoor use on level floors. Clean glass with glass
cleaner; steel parts and painted surfaces with a moist cloth.
Step 1
Unpack and Identify
Unpack and identify the components at left. Note that some components
are shipped inside the cabinet. The assembly workspace should be a non-
marring surface such as carpet. For missing hardware pieces, please
contact BDI Customer Service at [email protected]. For all
other concerns, please contact your BDI Retailer.
Step 2
Leveling and Shelf Adjustment
Component List
Designed by Al Glass and Cristian Wicha.
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. ©2009, BDI
Made in China. 8227-2REV100609v3
M
irage
8227-2
a s s e m b l y i n s t r u c t i o n s
bdiusa
.
com customerservice
@
bdiusa
.
com
B - Allen Wrench x 1
A - Phillips Screwdriver
x 1
For more information about the adjustable levelers and
troubleshooting, be sure to check out “Fine tuning your
new BDI Mirage Home Theater Furniture” at the end of
these instructions.
E- Back Panel x 2
D - Adjustable Shelf x 3
Adjustable leveler glides on
are accessible from inside
the cabinet using the Allen
Wrench (B).
The shelf pins located inside
the cabinet space may be
repositioned, allowing you to
raise or lower each shelf to the
desired level.
Shelf Pin
B
A
C