BDI 6004 Sequel - Manual

1
Placement and Maintenance
Sequel ® Home Office Furniture is designed for indoor use. Clean glass
with glass cleaner, and steel parts and wood veneer with a moist cloth.
Your Sequel ® Home Office Furniture is engineered for easy assembly.
Carefully follow this procedure to prevent any damage.
Do not use power tools for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, please contact BDI Customer Service at customerservice@
bdiusa.com. For all other concerns, please contact your BDI Retailer.
sequel
®
6004
wall-mounted desk
Designed by Matthew Weatherly.
These distinctive product configurations
are protected by US and international
patents, trade dress, and/or copyright laws.
“Sequel” and BDI are trademarks of Becker
Designed, Inc. All Rights reserved. ©2014
Becker Designed, Inc.
Made in Taiwan. 6004REV012615v3
R - 1/4-20 x 6mm Screw
x 4
H - Hex Wrench x 1
Component List
W -1/4-20 x 58mm Screw
x 3
X - Adhesive Foam/Magnet
x 2
O - Adhesive Dot x 4
U - Adhesive Bumper x 2
N - Set Screw x 4
T - Power Strip Bay x 1
I -Toggle Anchor Kit x 2
S - Kick Panel Stop x 2
L - Drywall Anchor x 2
M - Drywall Screw x 2
K - Wood Screw x 4
J - Washer x 6
V - Drawer Liner x 1
a s s e m b l y i n s t r u c t i o n s
bdiusa.com [email protected]
P - 1/4-20 x 38 mm Screw
x 4
Q - 1/4-20 x 12 mm Screw
x 4
F - Top Glass x 1
A - Wall Attachment Rail x 1
CR - Right Desk Side x 1
D - Wire Management Trough x 1
CL - Left Desk Side x 1
G - Wire Management Lid x 1
B - Drawer Assembly x 1
E - Kick Panel x 1
TWO PERSON ASSEMBLY