Application example – American Time Wireless Indoor Bell User Manual
Page 6
© American Time
Wireless Bell
Application Example
To manually activate the Wireless Bell using the Remote Connect web interface:
1. Enter your SiteSync IQ system controller IP address into a web browser (such as Internet Explorer)
2. Log in with your User name and Password
3. Select Circuit tab
4. Select the Manual Activation tab
5. Change the Signal Duration for the appropriate circuit to your desired duration (1-9 seconds, ON)
6. Enable the circuit # associated with your Wireless Bell by putting a check mark a in the appropriate box
7. Click on the Wireless button
The Wireless Bell will sound for the duration set in the Remote Connect application.
4