American Time Wireless Indoor Bell - Manual (Page 3)

© American Time
Wireless Bell
Introduction
The SiteSync IQ® Wireless Bell is a device which is triggered wirelessly by the SiteSync IQ System Controller. This Wireless
Bell may be triggered by programmed events in the system controller, on demand using the MAN button on the system
controller or the Circuit tab of the Remote Connect web interface (using a SiteSync IQ system controller with the Ethernet
option and a computer with internet access).
Each Wireless Bell is factory set to one of the wired signal circuit relays in the system controller. The part number will
indicate which circuit of the system controller the bell is configured to (i.e. H004579-1 is set to circuit 1, H004579-2 is set
to circuit 2).
Part # Description
H004579-1 set to Circuit 1
H004579-2 set to Circuit 2
H004579-3 set to Circuit 3
H004579-4 set to Circuit 4
H004579-5 set to Circuit 5
H004579-6 set to Circuit 6
1
The Remote Connect web interface allows for convenient
control of the Wireless Bell from a remote computer
(inside or outside of the facility). Timed events (ON,
OFF or 1-9 seconds duration) may be programmed for
wired and wireless signals. It also allows for on demand
(manual) control of these signals.
Ethernet
Link
Remote
Connect Web
Interface
SiteSync IQ System Controller