Specifications – American Time Wired Tone Generator User Manual
Page 5
5
© American Time
Multi Tone Generator
Contact
Information
Operation
Specifications
Specifications
Output Signal Specifications
Rated Output: ................ Adjustable from 0-1.15 volt P-P
Load Impedance: .......... 600 ohms or higher
Power Requirements: ... 12-15vdc, 1 amp maximum; plug-in power module included
Controls: ........................ Gain control - Screwdriver adjustment on the front panel
Inputs: ........................... T1-T4 four dry contact inputs for tone selection. The Audio In input
....................................... allows normal background audio to play. Pre-empted by tone selection inputs
....................................... T1-T4.
• Steady tones and Whoop last for the duration of the
contact input.
• Pulsed tones are 0.4 seconds ON and 0.4 seconds OFF
with a one second break before repeating.
• A two pulse tone repeats every 2.5 seconds for the
duration of contact input.
• A three pulse tone repeats every 3.25 seconds for the
duration of the contact input.
• The Chime sounds once when the contact is closed and
again when the contact is opened.