Ivie LEQ-PC -- Companion for Analysis on PC - Manual (Page 2)

LEQ-PC
Quick Start
Ivie's LEQ-PC software is a PC-based
software application for viewing and
printing data measured and accumulated
with Ivie LEQ-35 or LEQ-45 survey
analyzers.
After LEQ data is saved to a file on the
IE-35 or IE-45, It can be opened for
viewing in the LEQ-PC software. With
".leq" files from the survey instrument on
the hard drive of your PC, start LEQ-PC
and use the standard Windows interface
to navigate to and open one of the ".leq"
data files. Select the file of choice.
Note: File saving, recalling and general
management in LEQ-PC follows normal
Windows conventions.
The file will open in the LEQ-PC software
and the various numbered tests that were
saved in the file will appear in the left
vertical window. At this point, no data is
visible on the chart or in the lower data
window.
After selecting the test number of interest,
click on the "+" icon to show the first data
line in the data window. The default datum
selected is A weighted Fast SPL. Each
time you click on the "+" icon, an additional
data line is added in the data window.
For each selected data line, a graphic
representation of the data is shown in the
chart window. To change the selection of
data type for a given data line, click on the
line, then open the combo box by clicking
on the down arrow, and select from the
menu of data available.