Brennenstuhl Power Jet-Light 4 x 55 Watt IP54 spotlight 5m H07RN-F 3G1,5 4x4800lm Energy efficiency class A - Manual (Page 19)

15 GB
Maintenance / Cleaning and care / Disposal / Warranty and Service
i First take the work light out of the frame (see
“Assembling/disassembling the work light”).
i Place the work light down with its lamp guard 2
at the bottom on the floor.
CAuTIOn! Place a soft cover or similar item
on the supporting surface first to avoid scratch-
ing the lamp guard
2 .
i Screw out the screws 15 counterclockwise
using a Phillips screwdriver (see Fig. G).
i Carefully turn the work light over so that the
lamp guard 2 is at the top.
i Carefully lift off the lamp guard 2 .
i Carefully move the retaining clip 16 on the
socket 17 of the defective lamp 20 upwards
with your thumb (see Fig. H).
i Release the rubber tabs 18 from the clamps 19
(see Fig. H).
i Withdraw the defective bulb 20 carefully
upwards out of the socket 17 .
i Only then should you draw the defective lamp 20
out of the clamps 19 .
i Push a new lamp 20 (55 W, PL compact lamp)
into the clamps 19 .
i Push the lamp 20 carefully into the socket 17 .
i Fasten the rubber tabs 18 back on the clamps
19 (see Fig. H).
i Carefully press in the retaining clip 16 on the
socket 17 of the defective lamp 20 again
downwards with your thumb (see Fig. H).
i Put on the lamp guard 2 back on the work light.
i Carefully turn the work light over so that the
lamp guard 2 lies on the floor.
CAuTIOn! Place a soft cover or similar item
on the supporting surface first to avoid scratch-
ing the lamp guard
2 .
i Screw in the screws 15 clockwise using a
Phillips screwdriver (see Fig. G).
i Place the work light back on to the frame (see
“Assembling/disassembling the work light”).
Q
Cleaning and care
WARnInG! Pull the mains plug out of the
mains socket before you carry out any task on the
device. Otherwise there is a danger to life!
i Clean the product using a slightly moist,
fluff-free cloth.
Q
Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at your local
recycling facilities.
never dispose of electrical appli-
ances in the household waste!
In accordance with European Directive 2002/96/EC
on used electrical and electronic appliances and its
implementation in national law, used electrical ap-
pliances must be collected separately and recycled
in an ecologically compatible manner.
Details of current options for disposing of electrical
appliances after their useful life can be obtained
from your local or city council.
Q
Warranty and Service
q
Warranty Declaration
This instrument has a 2-year warranty from the date of
purchase; the warranty is only valid for the original
purchaser and is not transferable. Please retain
your receipt as proof of purchase. The warranty
applies to material or manufacturing defects only. It
does not cover wear parts or damage caused by
improper use. The warranty shall expire in the
event of third-party intervention. This warranty shall
not affect your statutory rights. Please contact the
service centre by telephone in the event of any
claims under the warranty. This is the only way to
ensure that your instrument can be returned free of
charge.
455_Arbeitsleuchte_Content_DE_GB_FR_NL_ES_IT_CZ.indd 15 18.06.09 10:20