Lingenfelter L8200xxxxx Lingenfelter Camaro Billet Pedal 2010-2012 v1.1 - Manual (Page 6)

Page
12. Using the silver marker and the supplied
foot rest pedal, mark the screw locations on the
foot rest and drill the pilot holes using the 1/8” drill
bit Using a Phillips head screw driver and four
(4) of the self tapping screws included, screw on
the foot rest cover. Take care to ensure that the
cover is straight and that it covers the entire OEM
foot rest.
13. Vacuum out the metal shards and clear
away any other debris.
5.
14. The installation of your LPE Pedal Covers
is now complete.
NOTE: Make sure to check the pedals
periodically to ensure that the fasteners have
not loosened over time.