Lingenfelter L300152012 Lingenfelter ZL1 Camaro Intercooler Fluid Reservoir 2012 v1.2 User Manual
Page 2
Page 1.
Parts List
LPE Intercooler Fluid Reservoir Kit (PN: L300152012)
#
Description
Part number
1
High capacity intercooler reservoir
RFB10155014
1
Pressure Cap, 16 psi
L300170016
1
90 degree heater hose
9820
3
Constant tension clamp, for 15/16” OD hose
7329K15
1
22.6mm Oetiker clamp
52545K72
1
Lingenfelter decal
L920010000
1
Instructions
N/A
Tools & Materials Required
Additional Required Components
• 7/8” open-ended wrench
• Hose cutter
• Teflon thread sealant (liquid)
• Razor blade (or equivalent)
• Constant tension clamp pliers (or equivalent)
#
Description
Part number
1
ZL1 Camaro Air Intake Kit
L650162012
• Spring-loaded hose clamp pliers (or
equivalent)
• Silicone lubricant
• Coolant- 50/50 DEX-COOL antifreeze and tap
water (distilled water can be substituted for
tap water)
Thank you for purchasing the Lingenfelter Performance Engineering (LPE) Intercooler fluid reservoir
Kit for the ZL1 Camaro. The ZL1 Camaro does not come from the factory with an intercooler fluid
reservoir, which means that the only available fluid is the fluid running through the lines. The LPE
intercooler fluid reservoir is capable of storing up to an additional four liters of fluid for the system. In
racing applications, the fluid in the intercooler fluid reservoir can be replaced with ice to help cool the
system between runs.
Read the entire instruction manual before beginning installation. Many of the stock parts will
be used in reassembly.
When referencing the side of the vehicle, the driver side of the vehicle is considered the left
side and the passenger side of the vehicle is considered the right side of the vehicle.
Due to where the LPE intercooler fluid reservoir is mounted on the vehicle, the installation of
this kit requires the installation of an aftermarket airbox. This reservoir was designed to fit
with the LPE ZL1 Camaro Air Intake Kit (L650162012). LPE cannot verify that this reservoir will
fit with any other aftermarket air intake kits.
These instructions assume that you have already removed the stock airbox, as well as the
charge air cooler coolant hoses. The LPE intercooler fluid reservoir can be installed after the
LPE ZL1 Camaro Air Intake Kit (L650162012) is installed, but LPE recommends installing the
intercooler fluid reservoir before the air intake kit. Installing the intercooler fluid reservoir first
will give you more room for installation.