FeiYu Tech FY-91Q - Manual (Page 13)

GuiLin FeiYu Electronic Technology Co., Ltd
GuiLin FeiYu Electronic Technology Co., Ltd www.feiyudz.cn E-mail: [email protected]
Page 12
1. The FY-91Q is connected to the receiver via this cable bundle:
2. The wire colors will help you trace the connection to your Receiver:
Wire Color Receive Channel
White (bundled with red and
black) Aileron Channel 1
Orange Elevator Channel 2
Green Throttle Channel 3
Yellow Rudder Channel 4
Brown Any free channel controlled by
3-way switch or dial (refer page 6) Channel 5
(example)
3. Note that the open channel for Switch 1 (SW 1) must be controlled by either a
3-way switch or a dial on your radio transmitter. SW1 controls the Flight
Modes of the FY-91Q.
Vibration Damping
a) The FY-91Q flight controller algorithms can filter and operate under
normal vibration levels, however if the vibration and shock experienced
by the onboard sensors is too extreme, stabilization can fail and the system
can shut down altogether.
b) Because of this, to achieve the best stabilization and flight performance
out of the FY-91Q, you must minimize the amount of vibration on the
aircraft as best you can.
c) Examples of vibration reduction steps that can be taken:
i) Ensure your motors are mounted properly and squarely.
ii) Balance your propellers regardless of the manufacturer’s claim of
perfect balance out of the factory.
iii) Balance your motor bell housing (if possible).