FeiYu Tech FY-Panda2 Autopilot - Manual (Page 23)

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
Page 22
11.4 Connect PandaⅡ To Our GCS Software
When you finish the flight control system installation and power on the whole system.
Please choose the right COM"X"(Like:COM1),baud rate:19200 and click on "Connect"
button, this time will pop-up a ID setting dialog box .Enter the ID number of the Panda
Ⅱ ,
click ―OK‖ button, it will pop-up a dialog box to prompt record the log file, choose the save
path , you can change the file name . Click the ―save‖ button . After the connection is
successful, you can see the data which pass back from Panda
Ⅱ in GCS.
Connection ID number
Firmware of Panda
Ⅱ V1.2 or above version increased the ID number
matching function . Users can set the ID number of the Panda
Ⅱ by oneself , only when