Austin Hughes PPS-01 - Manual (Page 10)

www.austin-hughes.com UM-PPS-01-Q212V9 P.6
< 1.4 > PPS-01 IP dongle GUI Software
Each IP dongle provides a built-in GUI software, PPS-01, which allows user, via an I.E. web browser, to see PDU’s data
and remotely manage the PDU over a TCP/IP Ethernet network.
Each I.E. supports ONLY one IP dongle. If the user installs more IP dongles, multi windows will be required.
< Status >
- Data refresh every 10 seconds
- Disable Refresh during data input
Status of all connected PDUs
Aggregate current on each PDU
Latest loading on each circuit of PDU
Alarm threshold setup
: save the changes
: quit without changes
PPS-01 is a management software but with very limited features. The user can use advanced software,
InfraPower Manager IPM-01.
Step 1. Open Internet Explorer ( I.E. ), version 6.0 or above
Step 2. Enter the confi gured IP dongle address into the I.E. address bar
( Refer to set up IP utilities p.5 )
Step 3. Enter password ( Refer to set up IP utilities P.5 )