Battery operation, Note: when charging your battery only, make sure – Audiovox MVX507 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

WRIST STRAP ATTACHMENT

BATTERY OPERATION

Be sure that your battery is fully charged before using your
cellular telephone for the first time. Your telephone will not

operate without a charged battery.

BATTERY INSERTION/REMOVAL

Battery Insertion

Battery Removal

When your battery is charged as illustrated in the previous
page, “Bat-t-er’d Charge” will be displayed. The bar seg

ment of the Battery Level Indicator will flash during charg
ing.
• When “F-ul ly Char ged” is displayed, battery charg

ing is completed.

Notes: • The standard battery BTE405 will be fully

charged in about 3 hours. The optional BTR405

and BTM405 will be fully charged in about 2
hours. However, actual charging time varies
with battery conditions.

• To place or receive calls during charging, press

and hold @) to turn your phone on. After calls,
press and hold @) again to turn your phone
off.

The desk top type Rapid Charger RC505 is standard acces
sory of MVX507. During charging by use of RC505, LED
on the Rapid Charger will light red. When the charging is
completed, the LED color will change to green.

A flashing red light indicates when the battery temperature
is out of charge range or defective.

Note:

When charging your Battery only, make sure
that the battery label faces the LED side of
Rapid Charger.