Directed Electronics 951 User Manual

Page 25

To activate turbo timer mode with a manual transmission:

Enter MTS mode with the door open.

Transmit the timer mode feature with the remote by pressing

AUX

two-times,

and then

AUX

After exiting the vehicle, lock the system and the vehicle remains running for

the programmed runtime. (The remote start feature is still enabled).

You can still remote start the vehicle after the turbo timer has timed out and shut

off the vehicle. For safety reasons, if a door is opened (while the system is locked

or unlocked ) while you are away, the remote start exits the manual transmission

mode and does not remote start until the MTS sequence is re-initiated.

Note: An optional push button can be hard wired to the (-) activation input

(H1/10) on the remote start. This allows the user to activate the turbo timer

without having to use the remote.

When the vehicle is running follow the procedures listed above, but instead of

pressing the remote, press the push button the appropriate number of times to ac-

tivate the remote start (factory setting is for 1 pulse). The remote emits the remote

start confirmation tone. Now you can turn off the ignition and exit the vehicle.

The car remains running for the pre-programmed amount of time.