Directed Electronics 951 - Manual (Page 21)

21 © 2008 Directed Electronics. All rights reserved.
Command
: Press
AUX
one- time and then press
AUX
.
Feedback
: Screen changes to unlock icon
Notes
: Unlocks the system without chirps
➤
Overriding the optional starter kill
To bypass the optional starter kill without a remote control:
Use your override switch located on the control center (see diagram below) to
bypass the system. This switch bypasses the system only if you have the vehicle
key.
2. Radious will be if not specified.
1. Texture is same as
3. Body color : INJECT TOLERANCE SPEC.
*Tolerance please refer specification
of tolerance limits "c"
120~300
DIMENSION
30~120
UNDER 6
0.40 0.80
0.20
0.10
0.08
A
± GRADE
6~30
B
±
0.40
0.20
0.16
2.00
C
±
0.40
0.80
0.30
DEI
NUTEK
FELIX
VICTOR
APPD BY
UNIT:
M/M
CODE
MATERIAL
FINISH
SCALE:
1:1
YGF
SHEET
DRN BY
CHK BY
11/20/07
OF
DATE
A4
TITLE
DEPT SIZE
REV.
1
REVISIONS
DESCRIPTION
CORPORATION
OLED IVU
94I0600
DRAWING NO
0
REV
DATE DRN.
94I0600
CASE P/N:IADGH0A1
KEY P/N:IKDEL0A0
36.32
11.50
10.44
%2'<0$7(5,$/+,+($7$%689
%/$&.
To check proper operation:
While the vehicle is locked, open the door. Immediately insert the key into 1.
the ignition and turn it to the run or on position (all the indicators in the
dash turn on).
Press and release the Override Switch one time. The optional starter kill is 2.
bypassed. You can now start the vehicle with the key.
Note: The Override Switch feature allows you to select a specific number of
presses needed to unlock the system. If the Override Switch has been pro-
grammed to a new number of presses by your authorized dealer, that number
should be indicated below.
Override Switch Number ___________