Aiwa SX-N332 - Manual (Page 49)

Frequency range 87.5 MHz to 108 MHz Disc Compact disc
Usable sensitivity (iHF) 1.3|iV(75 ohms) 13.2 dBf Scanning method Non contact optical scanner (semi­
Alternate channel selectivity 50 dB (±400 kHz) conductor laser application)
Signal-to-noise ratio 70 dB (STEREO), 76 dB (MONO) Laser Semiconductor laser (A, = 780 nm)
Harmonic distortion 0.3 % (MONO), 1 kHz Rotation speed Approx. 500 rpm - 200 rpm (CLV)
0.5 % (STEREO, L-R), 1 kHz Error correction Cross Interleave, Reed Solomon
Frequency response 30 Hz to 15 kHz (±0.5 dB, - 3 dB) code
Stereo separation 33 dB at 1 kHz No. of channeis 2 channels
Antenna 75 ohms (unbalanced) D-A conversion 16-bit linear
Wow/flutter Unmeasurable
Signal-to-noise ratio 90 dB (1 kHz, 0 dB)
Frequency range NSX-330HE, E, K, NSX-A92HE: Harmonic distortion 0.05% (1 kHz, 0 dB)
AM 531 (530) kHz to 1,602 (1,710)
kHz
NSX-330LH, U, C, NSX-332U: Cabinet type 3 way, bass reflex (Magnetism sealed
AM 530 (531) kHzto 1,710 (1,602) type)
kHz Speaker 130 mm (5Vs in.) cone type woofer
Usable sensitivity 350 |j,V/m 50 mm (2 in.) cone type tweeter
Selectivity 22 dB (9 kHz) 20 mm ('Yi6 in.) ceramic type super
Signai-to-noise ratio 53dB(100 dB input) tweeter
Antenna Loop antenna Impedance 6 ohms
Music power 40 W
(E and К modeis oniy) Output sound pressure level 87 dB/W/m
Frequency range 144 kHz to 290 kHz Dimensions (W x H x D) 180x302.5x200 mm
Sensitivity 1,400 pV/m (7Va X 12 X 7Vs in.)
Antenna Loop antenna Weight 2.6 kg (5.7 lbs.)
Program timer On-timer, capable of free setting Power requirements NSX-330LH, HE, NSX-A92HE:
Sieep timer Capable of setting in 10-minute AC 120 V/220 V/240 V, switchable
increments, 120 minutes maximum 50/60 Hz
NSX-330U, C, NSX-332U:
AC 120 V/220 V - 240 V, switchable
Power output NSX-330LH, HE, NSX-A92HE:40W 50/60 Hz
± 40W (6 ohms, T.H.D. 10% 1 kHz) NSX-330E: AC 230 V, 50 Hz
NSX-330E: 30W ± 30W (6 ohms. NSX-330K: AC 240 V, 50 Hz
T.H.D. 1% 1kHz) Power consumption NSX-330LH, HE, NSX-A92: 85 W
NSX-330K: 40W ± 40W (6 ohms, NSX-330/332U: SOW
T.H.D. 10% 1kHz) NSX-330E, K: 21OW
30W ± 30W (6 ohms, T.H.D. 1% 1 NSX-330C: 100W
kHz) Dimensions (W x H x D) Center unit:
FTC RULE (NSX-330U, C, 260 X 302.5 X 329.5 mm
NSX-332U) (1074x 12x 13 in.)
30 watts per channel, Min. System-
RMS at 6 ohms, from 65 Hz to 15 620 X 302.5 x 329.5 mm
kHz, with no more than 1% (2472x12x13 in)
Total Harmonic Distortion Weight Center unit: 7.2 kg (15.8 lbs.)
Harmonic distortion 0.05% (15 W, 1 kHz, 6 ohms) System: 12.4 kg (27.3 lbs.)
Input sensitivity VIDEO/AUX: 150 mV (adjustable) Accessories FM feeder antenna (1)
AM loop antenna (1)
Remote control (1)
Track format 4 tracks, 2 channels
Frequency response CrOztape: 50-16,000 Hz • Specifications and external appearance are subject to change without
Normal tape: 50 - 15,000 Hz notice due to product improvement.
Signal-to-noise ratio 60 dB (DOLBY NR ON, CrOz tape • Dolby noise reduction manufactured under license from Dolby Laborato-
peak level) ries Licensing Corporation.
Tape speed 4,8 cm/sec. (1 Ve ips) “DOLBY” and the double-D symbol OD are trademarks of Dolby Labora-
Recording system AC bias tories Licensing Corporation.
Erasure system AC erase • The word “BBE” and the “BBE symbol” are trademarks of BBE Sound, Inc.
Motor DC servomotor x 1 Under license from BBE sound, Inc.
Heads Playback head x 1 (deck 1)
Recording/playback/erasure head x
Note
1 (deck 2) Please check the laws on copyright relating to recordings from discs, radio
or external tape for the country in which the machine is being used.
49