USL JSD-100 Manual - Manual (Page 33)

Page 32
8. JSD-100 Web Interface
The JSD-100 includes a web server. The web server can be used to view the current status of the JSD-100, view the
JSD-100 log, and upload new firmware.
The Status Page shows the current fader level, the current format, and a bar graph showing the audio output
levels, auditorium information, and network information. It also has buttons to select input format, adjust fader
level, and mute or unmute the system.
The Log Page shows the JSD-100 system log. A portion of a typical log page is shown below. Note that three time
zones are listed: UTC Time, GUI Time, and JSD Time. JSD Time and GUI time make adjustments for daylight saving
time based on whether daylight saving time is currently in effect at the GUI location. Since the observation of
daylight saving time varies, there is no guarantee that this setting will also be correct at the JSD-100 location.
Clicking the time zone abbreviation at the top of the JSD time column will reload the log page toggling whether
daylight saving time is used in the JSD time column. Click this as necessary for proper display of the time at the JSD-
100.