USL JSD-100 Manual - Manual (Page 12)

Page 11
Eight Channel Analog Audio Output (JSD-100x)
Eight Channels Balanced 300mV adjustable (L, C, R, Ls, Rs, LFE, Lc/Lrs, Rc/Rrs).
Sixteen Channel Analog Audio Output (JSD-100xA)
Sixteen Channels Balanced 300mV adjustable. Configurable as 13.1 broadband, biamp three or five screen
channels, triamp three screen channels.
Communication Ports
DB25 pulse automation.
Serial control – RS-232.
USB for laptop setup.
Ethernet 10/100 - RJ45.
Front Panel Interface
Eleven buttons: COAX1, COAX2, TOSLINK, DIGITAL 16 CH, USER 1, USER 2, ANALOG 8 CH, NON/SYNC, AUX,
MIC, and MUTE.
Main Fader – 0-10 used for main audio and bypass audio.
Front panel displays fader level and selected format. Bar graphs display output levels.
USB connector.
Power switch and power supply status LEDs. Turning power off activates bypass mode.
Format Selection
Digital (COAX1, COAX2, TOSLINK, 8 to 16 Channel AES-EBU).
Analog (8 channel, Non-Sync, Auxiliary, Microphone).
User 1, User 2 (Configurable in software, e.g., digital 16 channel at lower level, 7.1, 13.1, etc.).
Rear Panel Connectors – Main Chassis
PA Microphone – XLR / ¼” phone jack.
Calibration Microphone – 3.5mm stereo jack.
Eight Channel Analog – DB25.
Non/Sync – two RCA jacks.
AUX – two RCA jacks.
Hearing Impaired and Visual Narration – pluggable Phoenix connector.
COAX1 and COAX2 – RCA Jacks with transformer input
TOSLINK – Optical.
16 Channel Digital AES-EBU – DB25 and Dual RJ45.
Removable Memory Card – SD compatible.
Serial Control – RS-232.
Pulse Automation – DB25.
10/100M Ethernet – RJ45.
DC 12V Power Connector – 5mm with 2.5mm pin.
AC Power – IEC socket. 100-240VAC, 50/60Hz, 18W typical, 7.5W sleep.
Rear Panel Interface Module
All rear panel interface modules include an RJ25 connector for “USL-Link.” This IEEE 485 bus is used for remote
volume controls and other control functions.
JSD-100x (no second suffix letter) – Eight channel analog, one DB25 and one Phoenix connector (20 pins).
JSD-100xA – 16 channel analog output module – Two DB25 and two Phoenix connectors. Main DB25 and
Option DB25. Outputs configurable as crossover outputs or additional channels.
JSD-100xD – AES/EBU digital output module - 16 to 32 output channels.