SIG SAUER MOSQUITO - Manual (Page 9)

Safety mechanisms Handling
8 US 06.01
2. Remove key leaving end of lock flush or even
with bottom of grip (see Fig. 4, right).
5.2.1 Magazine safety
Removing the magazine fully from the pistol
prevents the pistol from being fired. The magazine
must be fully inserted into the magazine well in
order to fire the pistol.
6 Handling the pistol
6.1 General
The pistol is generally delivered preserved with a
thin, protective grease and oil coating and must be
stripped before being used for the first time,
protective oil or grease removed and lubricated
again. “First use“ (see section 9).
Procedure:
1. Strip pistol (see section 9.1).
2. Clean and relubricate pistol (see section 9.2).
3. Assemble pistol (see section 9.3).
6.2 Ammunition Fig. 4, decocked (left), unlocked (right)
Fig. 5, secured (left), locked (right)
WARNING!
Inadmissible ammunition
Possibly death or serious injuries and
damage to the pistol
• For your pistol, use only commercial grade
ammunition in its original packing for which
corresponds with the calibre of the pistol. The
correct calibre is imprinted on the pistol .22
Long Rifle.
• Never use reloaded, “refurbished”, hand-
loaded, non-standard ammunition or
ammunition of a different calibre.
• Never use dirty, wet, corroded, bent,
damaged or oiled ammunition.
• Never leave the ammunition lying
unattended.