SIG SAUER MOSQUITO - Manual (Page 13)

Handling
12 US 06.01
6.6 Reloading during firing
The slide is held in the open position.
Procedure:
1. Remove the empty magazine.
2. Insert full magazine and ensure that it is fully
engaged.
3. Depress slide catch lever or retract slide fully
and release.
– The pistol is loaded and ready to fire.
– The pistol can also be decocked using the
decocking lever.
– The pistol is now loaded, decocked and
ready to fire.
6.7 Unloading the pistol; magazine not
empty
Procedure:
1. Keep the pistol muzzle pointed in a safe
direction.
2. Press the decocking lever; the hammer is
lowered and held in the safety notch.
3. Depress magazine catch and remove
magazine.
4. Retract slide fully and engage the slide catch
lever. The round is ejected and the slide is held
in the open position.
5. Check (visually and manually with appropriate
aid) to ensure that the round has been ejected
and that there is no round in the chamber (see
Fig. 6).
6. Depress slide catch lever - the slide closes.
7. Depress decocking lever - hammer lowers.
8. Empty magazine.
9. Pick up ejected round and clean pistol.
The pistol is unloaded and decocked.
WARNING!
Lacking in awareness of potential dangers
Possibly death or serious injuries
• Never let the pistol out of your hand.
• Keep the pistol aimed at the safe target.
WARNING!
Pistol is ready to fire
Possibly death or serious injuries
• Never let the pistol out of your hand before it
is unloaded.
•
The pistol is loaded; a round is in the
chamber.
• Perform the unloading action with only two
fingers from the rear.
• Never place your hand over the slide
opening.