SIG SAUER MOSQUITO - Manual (Page 18)

Maintenance
17 US 06.01
9 Pistol maintenance
9.1 Field stripping the pistol
Procedure:
1. Unload pistol (see sections 6.7 and 6.8).
2. Remove the threaded cap of the Silencer
version (see chapter 7.2.1), resp. the
counterweight of the Sport version (see
chapter 7.1.1).
3. Retract slide 4 fully and lock open by engaging
the slide catch lever 18 (see Fig. 13).
4. Check to ensure there is no round in the
chamber.
5. Depress slide catch lever to close slide.
6. Rotate takedown lever 16 clockwise 180° until
it points forward (see Fig. 14).
7. Retract slide fully; lift rear of slide until clear of
frame and slowly move slide group forward
towards muzzle end of pistol (see Fig. 15 and
Fig. 16).
WARNING!
Pistol is ready to fire
Possibly death or serious injuries
• Magazine must be removed from the pistol.
•
Before field stripping your pistol for cleaning,
verify again that it is not loaded (see sections
6.7 and 6.8).
• Do not put your fingers into the slide.
Fig. 13
1.
2.
18 4
Fig. 14
Fig. 15
Fig. 16
16