Personal, How to create a new user pin - continued – iStorage datAshur Personal Manual User Manual
Page 7

#7
www.istorage-uk.com
iStorage datAshur Personal
®
Manual – v 31
personal
Note:
It becomes necessary to format
the drive at this point as all
previous data is obscured with the
previous encryption key (including
the file allocation table).
INSTRUCTIONS
LED ACTIVITY
Press and hold
KEY Button for 3 seconds will illuminate together
While are illuminated enter a
New User PIN and press KEY Button
will blink in unison
Re-enter
New User PIN
and press
KEY Button
will illuminate together for approximately
4 seconds and then:
will blink indicating correct
PIN entry
Insert datAshur Personal into USB port
will illuminate in a constant state
blink alternately if
PIN entry incorrect
5. How to create a new User PIN - continued
PIN requirements:
• Must be between 7-15 digits in length
• Must not contain only repetitive numbers e.g. 3-3-3-3-3-3-3
• Must not contain only consecutive numbers e.g. (1-2-3-4-5-6-7),(7-8-9-0-1-2-3-4),(7-6-5-4-3-2-1)
• Drive must
NOT be connected to a host
A
User PIN can only be created when the
RED
LED is lit in a constant state (
datAshur
Personal
®
reset) or changed when the
GREEN
LED is blinking (
datAshur Personal
®
unlocked).
Neither
User nor Admin PIN can be created
while the drive is connected to a host com-
puter.