Interlogix UVM-4200 - Manual (Page 5)

User Manual 3 EN
Connections
1. AC Input
2. Head Phone Out
3. PC Stereo Input
4. HDMI
HDMI signal input
5. VGA
RGB signal input
6. DVI
DVI-D signal input
7. CAM2 R/L
Audio signal input left and right for CAM2
8. CAM2 IN/OUT
Composite signal input and output for CAM2
9. CAM1 R/L
Audio signal input left and right for CAM1
10. CAM1 IN/OUT
Composite signal input and output for CAM1
11. S-VIDEO IN/OUT
Separated signal input and output.
Front panel controls
Control panel
1 POWER Indicator
2 SOURCE (*)
Used to select from different input sources.
Press the UP or DOWN arrow to scroll through
the available sources, and press LEFT or
RIGHT arrow to confirm selection.
3

Down Arrow
Allows for vertical scrolling in the OSD (On-
Screen Display) menu.
4

Up Arrow (*)
Primary Function: Automatically adjusts the
display to the most optimal setting
possible.(VGA mode only)
Secondary Function: Allows for vertical scrolling
in the OSD menu.
5. IR Sensor Window
6 POWER
Switches the monitor on and off.
7 MENU
Turns the OSD window on. Turns the OSD
window off and moves from sub menu to top
menu in the OSD window.
8

Left Arrow (*)
Primary Function: Used to decrease the
volume.
Secondary Function: Moves cursor to the left in
the OSD window and decreases the value of
any selected menu.
9

Right Arrow (*)
Primary Function: Used to increase the volume.
Secondary Function: Moves cursor to the right
in the OSD window and increases the value of
any selected menu.
(*) = Hot key