ILY HDD Duplicator - Manual (Page 3)

Chapter 1 - Product Introduction
1. Features
● High copy speed supports up to 90MB/second.
● Auto power control to protects your HDD(only power on when working).
● Support 2.5" and 3.5" SATA HDD, IDE HDD and SSD.
● Support 3 different duplicator mode: quick copy (System and
files), All partitions and Whole HDD. Quick copy mode copies only Data
and System area which can highly increase the copy efficiency.
● Support Liunx (Ext2/Ext3), NTFS, FAT.
● Support DoD standard erase function.
● Auto detects and shows the bad sector quantity.
● Light weight for easy carry (320g only).
2. Product Overview
A. System Overview
B. LCD Configuration
3
Red : Fail
Green : Pass
Yellow : Powering
Target port
Source port
Backward
Forward
Confirm / OK
Cancel / ESC
Function
Time (mm:ss)
Copy progress % Copied processed size (Target)
Notes: 1-1 and multiple target HDD duplicators have same function buttons and lights, as well as the LCD
configuration. Therefore only 1-1 duplicator is shown here as example.
0:11 41% 860M
Copy x1 2047M
0:11 41% 860M
Target HDD Total size (Source)