ILY DaisyChian DVD/CD Duplicator Manual User Manual

Page 20

12.2 Disc => Image

This function shows you how to load the master source disc onto the Hard Drive and
save it as an image file.

a. Place Master Source Disc into any Drive,
b. Select 12.2 Disc -> Image and press ENT

press ENT

100%

•

Note: The source disc can be placed in any Reader or any one of Writer Drive.

12.3 Reader Speed

When you wish to perform this function, 12.2 Disc -> Image, set the Reading Speed
from the reading master source disc

•

Note: this function is ONLY available when loading the Source Disc to an HDD

12.4 Image Info

This function allows checking all image file information such as the Image file
number, Disc type, and its file size.

press ENT

3.875GB DVD disc image file A001

CD disc image with 65 min 28 sec, file name A003

12.5 Rename Image

This function allows you to rename an image file in HDD. This will help organize the
image.

press ENT

Select the image file you would like to rename

press ENT

Use

to select the character you want.

Press ENT to go to the next position.

There are total of 8 characters for the image name.

Empty Space will confirm the name change

Press ESC to cancel the whole process.

[Image Manager]
2. Disc => Image

[Disc = = > A001]
10% 446MB

[Disc = = > A001]
Finished

[Image Manager]
3. Reader Speed

[Image Manager]
4. Image Info.

[Image Info.]
A001 DVD 3875MB

[Image Info.]
A001 CD 65:28

[Image Manager]
5. Rename Image

001 [A001
DVD 4469MB

[Edit Image Name]
[A001 ]

[

Edit Name Change

]

[New Name ] OK?

[A001 ]
= >[New Name]