ILY DaisyChian DVD/CD Duplicator Manual - Manual (Page 16)

15
11. SETUP
Use this function group to change the manufacturer’s default setting.
11.1 Power On Time
You can set the system warm up time from 5 sec to 255 sec after system power on.
a. Select 11. Set Up and press ENT
b. Select 1. Power On Time and press ENT
c. Press
, to increase or decrease the seconds.
press ENT
press , to set seconds
11.2 Auto Start
This operation allows the duplicator to automatically execute copying once source
disc is placed in the master source drive and recordable discs in any of the writer
trays. You can disable or turn on the auto start function with the time (1-99 seconds)
it would take to activate this feature. To execute this function, you must set the
operation mode from COPY, TEST, VERIFY, COMPARE, COPY & VERIFY,
COPY&COMPARE to auto start copying.
press ENT
press , to set seconds
• Note: If you set the function off , the LCD screen will not show how many blank discs
are detected in writer trays.
11.3 Startup Menu
Select which function in the menu to see first when the duplicator is turned on.
press ENT
press , to select function
11.4 Write Method
You can select which mode to duplicate CD from “DAO” (Disc At once), “SAO”
(Session At Once), and “TAO” (Track At Once). The default mode is “DAO”.
press ENT
press , to select
11.5 Button Beep
Choose whether to hear a beep when you press a button or not.
press ENT
press , to select ON/OFF
[Setup]
1. Power On Time
Power On Delay
15 seconds
Auto Start
3 seconds
[Setup]
2. Auto Start
[Setup]
3. Startup Menu
[Startup Menu]
1. Copy Disc
Write Method
DAO
[Setup]
4. Write Method
Button Beep
ON
[Setup]
5. Button Beep