Brother Fax-170 - Manual (Page 47)

A D V A N C h: D AX 0 P K R A T ] 0 N
Receiving Faxes
See
Easy Receive
p.30
Remote Operation
If you answer a fax call on an extension phone, you can make your fax machine
take over by using the Activation Code. When you press the Activation Code
H El Q3 j fhe fax machine starts to receive a fax.
If the fax machine answers a voice call and double-rings for you to take over, use
the Deactivation Code to take the call at an extension phone.
If you answer a call, and no one is on the line, assume you’re receiving a fax. At
the fax machine phone, press |^, then hang up. At an extension phone, press
B E E , wait for fax receiving tones (chirps), then hang up. (Your caller will
have to press to send the fax,)
See
F/TRing
Time
p.31
For FJT Mode Only
when the machine is in F/T mode, it will use the, F/T Ring Time (double ringing)
to alert you to a voice call. If you’re at the fax machine you can lift the handset to
answer.
If you’re at an extension phone, you’ll need to lift the handset during the F/T
Ring Time and press [#) E E between the double rings. If no one is on the
line, or if someone wants to send you a fax, send the call back to the fax machine
by pressing B E E .
Changing Remote Codes
Remote Codes might not work with some telephone systems. The preset Activation
Code is B E E' The preset Deactivation Code is [5] [T] E-
If you are always disconnected when accessing your TAD remotely, try changing
the Activation Code from B E E to g) ® Bl and the Deactivation Code
from (#] E E to [9] E B-