Brother Fax-170 - Manual (Page 27)

f A X S E T T i N G S
The screen prompts you to select the type of number this is. Use [T) of CB to
select the type you want.
FAX a fax number
TEl a telephone (voice) number
F/T both a fax and telephone number
CHAIN a number (usually an access code) for chain dialing.
Press®.
S“' Return to Step 2 to store another Speed Dial number — OR — Press H
to exit.
Speed Dialing
1'" Pick up the handset — OR — Press ^
2 When you hear a dial tone, press [Speed DiolL then press the two-digit
Speed Dial number.
h you pressed [H^ to dial the call, pick up the handset when the other party
answers. (The speaker works only one way; the other party won’t be able to
hear you unless you pick up the handset.)
Changing One Touch and
Speed Dial Numbers
If you try to store a One Touch or Speed Dial number in a location where a
number is already stored, the screen displays the current name stored there, then
prompts you to either
L CHANGE — O R — 2. EXIT.
1 Press Q] to change the number stored, or press to exit without making a
change.
S'- If you want to erase the numbei; press S when the cursor is to the far left
of the digits.
S’ If you want to change a digit, use |Tj or [►] to position the cursor under the
digits you want to change, then press S.
4 Enter a new number, and press ®.
5 Follow the directions from Step 5 in Storing One Touch Numbers or Storing
Speed Dial Numbers.