Speed dialing, Hoid, Pause – Brother Fax-170 User Manual
Page 40: Tone/pulse, Searching telephone index, Pause tone/pulse searching telephone index
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
C
H A
?
T K R . S I X
See
Speed Dial
p,20
Speed Dialing
1
2
Pick up the handset — OR—Press PB|.
When you hear a dial tone, press |Speed Dial|, then press the two-digit
Speed Dial number.
If you pressed |Hook) to dial the call, pick up the handset when the other party
answers. (The speaker works only one way; the other party won’t be able to
hear you unless you pick up the handset.)
Hoid
1 Press (ffl] to put a call on Hold.
'2 You can put down the handset without disconnecting the call.
3
Pick up the fax machine handset to release the call from Hold. Picking up an
extension handset will not release the call from Hold.
Pause
Press iBwHol/fniisel to insert a 3.5 second pause between numbers.
Tone/Pulse
See
One-Tomb
and
Speed Dial
p. 20
if you have pulse dialing service, but need to send tone signals (for telephone
banking, for example), follow the directions below. If you have touch tone service,
you do not need this feature to send tone signals.
1
Lift the handset.
2
Press [5)- Any digits dialed after this send tone signals.
3
When you hang up, the fax machine returns to pulse dialing service.
Searching Telephone Index
You can search for names you have stored in One Touch and Speed Dial
memories. Names are stored alphabetically.
"t Press iTel-indexf then enter the first letter of the name you're looking for.
2
Press |T| or |T] to search the memory.
3
When the screen displays the name you want to call, pick up the handset or
4
Press to begin dialing.
§ When the call is over, hang up, or press iHook] to cancel the call.