Brother Fax-170 - Manual (Page 24)

G l i A P T t R T H E R E
NOTICE: The Telephone Consumer Protection Act of 1991 makes it unlawful for
any person to use a computer or electronic device to send any message via a
telephone fax machine unless such messages clearly contain, in a margin at the
top or bottom of each transmitted page, or on the first page of the transmission,
the date and time it is sent and an identification of the business or other entity or
other individual sending the message and the telephone number of the sending
machines or such business, other entity, or individual.
The telephone number you enter is used only for Call Back Message and
Cover Page features.
If you do not enter a fax number, no additional information can be entered.
To enter a space, press [►]•
If your station ID has already been programmed, the screen prompts “1” to
make a change, or “2” to exit without changing.
Storing One Touch Dial Numbers
You can store 5 fax/phone numbers that you can dial by pressing one key. You
can also store names with these numbers. When you press a One Touch dial
location, the screen displays the name or number as the call is dialed.
One Tbuch k^s are not the dial pad keys. They are the 5 keys (number 1-5)
located to the right of the dial pad.
1 Press iFunctionl. fT], (Tj.
2 Press the One Touch key where you want to store a number. (Key [T] is
pre-programmed for Brother Fax-Back^'"^ System. You can override it if you
wish.) The screen displays the location you selected.
3 Enter a number (up to 20 digits). If you want to enter a pause in the
dialing sequence (to wait for an “outside line,” for example), press
iRedial/Pausel as you’re entering digits. You can enter only one pause in each
AUTO DIAL number. Pressing fRediol/Poi/sel enters a 3.5-second pause when the
number is dialed, and a dash appeal^ on the screen.
4' Press The screen prompts you to enter a name for this number.
Use the keypad to enter the name (up to 15 characters), You can use the
ch art on page xx to help you enter letters — OR—Press H and go to
Step 7 to store the number without a name.