AquaCraft Rio 51 User Manual
Page 9
![background image](/manuals/660591/9/background.png)
CHECK THE RADIO SYSTEM
❏
1. Stand behind the boat with both the transmitter
and receiver turned on. Rotate the steering wheel to the
left. The back of the rudder should move to the left.
❏
2. Move the steering wheel to the right. The back
rudder should move to the right. If this is not the case,
simply move the steering servo reverse switch located
on the front of the transmitter (2) to the other position.
❏
3. Squeeze the throttle trigger on the transmitter; this
should open the throat of the carburetor. This is the proper
throttle arm position for full throttle.
❏
4. Idle position.
9
See also other documents in the category AquaCraft Water equipment:
- Air Force (15 pages)
- Alligator Tours (12 pages)
- Atlantic (8 pages)
- Atlantic II (8 pages)
- Bristol Bay (8 pages)
- Hammer (8 pages)
- King's Ransom (12 pages)
- Mini Alligator Tours (8 pages)
- Mini Rio (12 pages)
- Mini Thunder (12 pages)
- Mini Wildcat (12 pages)
- Miss Vegas (12 pages)
- Miss Seattle (8 pages)
- Miss Vegas Deuce (16 pages)
- Minimono (12 pages)
- Motley Crew (8 pages)
- Nitro Hammer (8 pages)
- P-27 Gunslinger (8 pages)
- Paradise (12 pages)
- Pro Fisherman (8 pages)
- Reef Racer (8 pages)
- Reef Racer 2 (8 pages)
- Reef Racer 2 Charger (2 pages)
- Rescue 17 (8 pages)
- Revolt 30 (12 pages)
- Rio 51Z (16 pages)
- Rio EP (16 pages)
- SuperVee 27 (11 pages)
- SuperVee 27R (16 pages)
- SuperVee 27 Nitro (12 pages)
- Top Speed 2 (20 pages)
- Top Speed 3 (24 pages)
- UL-1 Superior (12 pages)
- VS1 (20 pages)
- V24 One-Design (16 pages)
- Vela One Meter (16 pages)
- Wildcat (8 pages)
- 15 Marine Engine (4 pages)
- 18 Marine Engine (4 pages)
- 27 Rear Exhaust Airboat Engine (8 pages)
- 46 BB Marine Engine (6 pages)
- EP1 Electric Outboard Motor (4 pages)
- GrimRacer Precision Prop Balancer (4 pages)
- AQUB9540 Water Jacket Installation Procedure (4 pages)