Panasonic NV-SJ230A - Manual (Page 6)

The VCR is fitted with its own tuner (just like a normal TV) and
can be preset to receive up to 99 TV broadcast stations.
Pre-programmed TV Channels
(Australia only)
The local TV broadcast channels 2,7,9,10 and 28 are
factory-preset in this VCR.
That is, if you can receive television broadcasts on VHF
channels 2, 7, 9,10 and UHF channel 28, these are already
tuned on the programme positions with the matching
numbers. However, it is possible to cancel these settings and
tune the local TV broadcast channels to any desired
programme position.
Auto Tuning Using the On Screen Display
For New Zealand
When you use this VCR in New Zealand, need to operate as
follows:
Preparations
- Confirm that the TV is on and the VCR viewing channel is
selected.
- Turn on the VCR and select any programme position
except AV.
Operations
1 Press the MENU button Q to
display the Main menu on
the TV screen.
2 Press the Cursor buttons (A V) ©
to select [TUNER PRESET] then
press the OK button ©.
Press the Cursor buttons (A V) ©
to select [COUNTRY] then press
the Cursor buttons (< © to
select [NEW ZEALAND],
On Screen Display
1
<
шшшщ
; lock set
UKER PRESET
; hadd & delet £
YSTEM
)PTI0N
►сошту [ newzeal S^
AUTO TUNE
SEARCH
[2]
FINE
Press the Cursor buttons (A T)©
to select [AUTO TUNE] then press
the Cursor buttons {< >) © to
start the Auto Tuning.
- When Auto Tuning is completed,
the On Screen Display
disappears and programme
position 1 is selected.
CLEAR [OFF!
COUNTRV [NEW ZEALAND)
► AUTO TUNE
SEARCH (31
FINS
AUTO TUNING
IN PROGRESS,
■ WAIT,
Auto Tuning Using the On Screen Display
For Australia
Introduction
Auto Tuning using the On Screen Display should be
performed according to the following method if necessary.
Preparations
- Confirm that the TV is on and the VCR viewing channel is
selected,
- Turn on the VCR and select any programme position
except AV.
Operations
1 Press the MENU button © to display
the Main menu on the TV screen.
Press the Cursor buttons (A V) ©
to select [TUNER PRESET] then
press OK button ©.
Press the Cursor buttons (A T) ©
to select [AUTO TUNE] then press
the Cursor buttons (■^►) © to start
the Auto Tuning.
~ When Auto Tuning is completed,
the On Screen Display disappears
and programme position 1 is
selected.
‘■CLDCS SET
TUNER PRESET
CHADD&DELETE
SYSTEM
OPTION
I__ •• ■■ ■
CLOCK SET
»TUNER PRESET
СИ ADD&OELETE
SYSTEM
OPTION
CHI
CLEAR
COUNTRY
►AinOTUNE
SEARCH
FINE
( austr ÍSÍ a ]
[31
The number displayed here
is the number of channels
still to be auto tuned.
Channels that can be Received
VHF CATV UHF
AUSTRALIA 0-12 45-470MHZ 28-69
NEW ZEALAND 1-11 45-470MHZ 21-69
Notes:
- Auto Tuning searches for TV stations from VHF minimum to
UHF maximum and memorizes every tuned programme
position. Other programme positions are skipped.
- Auto Tuning takes five or more minutes to complete its
search.
~ If the VCR is not correctly tuned by Auto Tuning, follow the
procedure on page 7.
The number displayed here
is the number of channels
still to be auto tuned.