Industrial Data Systems IDS 550 - Manual (Page 5)

STANDARD PARAMETERS WORKSHEET
---------------------------------------
MENU SELECTION | PARAMETER | DEFAULT | FIELD SETTING
=====================================================================
1 INITIALIZE SYS | none (resets all parameters to factory settings)
---------------------------------------------------------------------
2 SELF TEST | TEST SCALE PORT| |
---------------------------------------------------------------------
| TEST SERIAL OUT| |
|---------------------------------------------------
| UNUSED ID'S | |
|---------------------------------------------------
| TEST MEMORY | |
---------------------------------------------------------------------
3 ADJUST CLOCK | ADJUST SEC/DAY | 0 |
---------------------------------------------------------------------
| BAUD RATE | (no default) |
4 CONFIG SER PORT|---------------------------------------------------
| DATA FORMAT | (no default) |
---------------------------------------------------------------------
| METER TYPE | CONDEC/WS700T |
|---------------------------------------------------
5 CONFIG SCALE | WEIGHT UNITS | UNITS = LB |
|---------------------------------------------------
| COUNT BY | COUNT BY 1 |
---------------------------------------------------------------------
| PAGE END PAUSE | Y (YES) |
|---------------------------------------------------
6 CONFIG PRINTER | INVERT PRINT | N (NO) |
|---------------------------------------------------
| MULTI-STRIKE | 0 |
---------------------------------------------------------------------
| ENAB PASSWORD 1| N (disabled) |
|---------------------------------------------------
| NEW PASSWORD | | **************
7 CONFIG PASSWORD|---------------------------------------------------
| ENAB PASSWORD 2| N (disabled) |
|---------------------------------------------------
| NEW PASSWORD | | **************
---------------------------------------------------------------------
| TRANS LABEL | TICKET |
8 CONFIG TRANS |---------------------------------------------------
| TRANS NUMBER | 1 |
---------------------------------------------------------------------
9 CONFIGURE APPLICATION PARAMETERS
---------------------------------------------------------------------
| HEADER LABEL | (blank) |
10 |---------------------------------------------------
CONFIG PAGE | CONFIG PAGE 1 | Defaults set by| see page work-
(Section 3) | CONFIG PAGE 2 | INITIALIZE SYS.| sheet, section
| CONFIG PAGE 3 | |
---------------------------------------------------------------------