Industrial Data Systems IDS 550 - Manual (Page 4)

ENTER - Enter data and go to the next step.
CLEAR - EXIT
The configuration functions use "scrolling menus". A
scrolling menu is a list of options that are viewed by pressing
the CONTINUE key or the REVIEW key. The CONTINUE key advances
the display to the next item in the menu, the REVIEW key retreats
to the previous item. The ENTER key selects the item being
displayed. The CLEAR key is used to exit from a menu.
EXAMPLE: Press the Square Configure switch. The configuration
menu has the following standard items:
INITIALIZE SYS
SELF TEST
ADJUST CLOCK
CONFIG SER PORT
CONFIG SCALE
CONFIG PRINTER
CONFIG PASSWORD
CONFIG TRANS
CONFIG PAGE
Press the CONTINUE key several times. The above listed menu
options are displayed one after another. Press the REVIEW key
several times. The list is displayed in reverse order. Press
the ENTER key to activate a function, press the CLEAR key to
exit.
CONFIGURE STANDARD PARAMETERS
-------------------------------------------------------------------
The standard configuration parameters for the IDS550 are as
follows:
1 INITIALIZE SYSTEM - Set all parameters to their default values.
2 SELF TEST - Activate the test program.
3 ADJUST CLOCK - Correct fast/slow clock.
4 CONFIG SER PORT - Set baud rate and data format to
match scale indicator input.
5 CONFIG SCALE - Select meter type, set units (eg. LB,
KG...) and count-by (eg. 1, 2, 5, .).
6 CONFIG PRINTER - Select printer type.
7 CONFIG PASSWORD - Enable and set password protection.
8 CONFIG TRANS - Change ticket label and ticket number.
9 CFG APPLICATION - Configure Application Specific Parameters.
NOTE: some applications may have additional configuration
parameters.