FRITSCH PULVERISETTE 6 classic line - Manual (Page 11)

GTM-System page 8
2.4.3 Accumulator-lifespan
• The lifespan of the accumulators decreases with overheating
of the transmitter unit.
• The accumulators should preferably be fully empty before
recharging.
• The transmitter accumulators can be recharged about 1000
times if properly used.
2.5 Start-up of the transmitter group
• Loosen screws of transmitter unit of grinding-bowl
• Plug in the switch-plug or loading cable into the socket of the
transmitter unit.
• Loosen the screws of the cover plate of the transmitter unit
• Put the start-up-switch into the "On" position. You'll see a dot
(shown here in "Off" position).