With a dss receiver, Audioa/ideo connections – Panasonic OMNIVISION PV-8402 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

With a DSS Receiver

IN FROM

CABLE or Antenna

IN FROM
Satellite Dish

You can:

1) Record and view any channel including

scrambled channels; channel selection
must be made at the DSS Receiver.

2) Program one channel for unattended

recording.

NOTE: The DSS receiver must be turned off to view

programs from a cable box or antenna. See the

DSS manual for details.

‘DSS® is a registered trademark of DIRECTV, INC., a unit of GM Hughed Electronics.

OUT TO TV

VHFAJHF

AudioA/ideo Connections

If your TV has AUDIO IN and VIDEO IN terminals, you can connect your

VCR to them to receive a higher quality picture ari^ sound.

Connect the VIDEO OUT terminal on the VCR to the VIDEO IN terminal of your TV.

2 Connect the AUDIO OUT terminals on the VCR to the AUDIO IN terminals of your TV.

3 Set the VIDEO/TV selector of your TV (Monitor/Receiver) to “VIDEO.”

NOTE:

To use your TV as a VCR monitor, set the ViDEO/TV selector on the TV (Monitor/Receiver) to “VIDEO."

Note to CABLE system installer:

This reminder is provided to call the CABLE system installer’s attention to Article 820-40 of the NEC in USA (and to the
Canadian Electrical Code in Canada) that provides guidelines for proper grounding and, in particular, specifies that the

cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.