Il cdl_ "lg^ copying your tapes (dubbing), Connections you’ll need to make, To monitor dubbing on your tv – Panasonic OMNIVISION PV-8402 User Manual
Page 23: 3 select '"line” input mode on the, Il cdl_ "lg^ copying your tapes, Dubbing)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Il cdl_ "lg^ Copying Your Tapes
(Dubbing)
Connections you’ll need to make.
Playing (Source) VCR
Recording (Editing) VCR
TV for Monitoring
1
Insert a pre-recorded
tape into the Playing
(Source) VCR.
2
Insert a blank tape with
record tab into the
Recording (Editing) VCR.
To Monitor Dubbing on Your TV
1
Turn your TV on and tune to the Recording
VCR channel (CH3 or CH4).
2 Set the VCR/TV Selector on the Recording
VCR to “VCR."
3
Select '"LINE” Input mode on the
Recording (Editing) VCR. (See “Selecting
the Input Mode" at right.)
4
Press PLAY on the Playing VCR.
Press PAUSE at the desired starting point.
5
Press REC on the Recording VCR, and then
press PAUSE immediately thereafter.
6
Press PAUSE on both VCRs at the same
time, to begin copying.
To Edit Out Unwanted Parts
Press PAUSE on the recording VCR while copying is
in progress. Press PAUSE again to resume copying.
7
Press STOP on both VCRs to stop copying.
f
Caution:
Unauthorized exchanging and/or
copying of copyrighted recordings
may be copyright infringement.
V___
)
23