Remote controller, Troubleshooting, Trouble – Panasonic AG-5210 User Manual
Page 13: Corrections, Refer servicing to qualified service personnel
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Remote Controller
When the optional accessory remote controller AG-A11 is
connected to the Remote Control Jack on the front panel
of this unit, the unit can be controlled from a distance
instead of by using the buttons on the unit itself.
Troubleshooting
...Check the following points once again.
Trouble
Corrections
No power
No
operation
starts
when
operation
buttons are pressed.
The playback picture is noisy or con
tains streaks.
• Check that the Power Cord is connected to the AC Outlet.
'Check that the Power Switch is ON.
'Check that the cassette tape is inserted.
'Check the “
cl
” rnark.
When the “
^ "
mark lights:
Take out the cassette tape and leave the VTR on and let it remain at
room temperature until "
rj
” mark disappears. Depending on the sur
rounding conditions, this may take several hours.
'Adjust by pressing the Tracking Control Buttons.
Refer servicing to qualified service personnel.
- 13 -