Panasonic NV-SD230A - Manual (Page 7)

11 INPUT SELECT
Selects the AV external recording source.
12 DISPLAY
Changes the indication on the VCR display or on screen
display as follows.
|-^CIock-»Counter-^Remaining Tape Time —|
13 No function.
This button is not used to operate this VCR.
14 INDEX
Used for the index search function.
15 REC«
Starts recording.
16 REPEAT
For the repeat playback function.
17 >(PLAY)
Starts playback. is lit.
For the repeat playback function.
18 VCR/TV
No function.
This button is not used to operate this VCR.
TV OPERATION
Set VCR/TV switch to TV for using POWER Cb, the V
and buttons and the numeric buttons.
19 POWER (b
Press to switch the TV from on to standby mode or vice
versa. In standby mode, the TV is still connected to the
mains.
•With some TV models, it may only be possible to
switch the TV to the standby mode using this button.
In this case, use AV or the V and buttons to
switch the TV on.
• Ensure that VCR/TV switch is set to TV.
20 Numeric Buttons
Selects programme positions (1-99) of the TV.
•Ensure that
VCR/TV switch is set to TV.
CD
:S
>2
CD
CQ
21 AV
Selects TV input.
22 V/N
Selects the required programme position (TV station) of
the TV.
•Ensure that VCR/TV switch is set to TV,
23 VOLUME -^ +
Adjusts the volume of the TV.
Using for Operation of your TV
Only Panasonic televisions can be operated with the
provided remote controller.
The settings for operating the TV with the remote controller
have already been made.
No additional settings need to be performed.
Note:
Some Panasonic televisions cannot be operated using this
remote controller.