Camera recording – Panasonic NV-D48 Series User Manual

Page 28

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CAMERA RECORDING

^ Press the Stop Button (■) on the VTR to stop the

recording.

STOP

□

• If you leave the VTR in the pause mode for more

than 5 minutes, the VTR w \ \ stop automatically to

protect the tape and the video heads.

•Even if the video camera is equipped with video

recorder remote control functions, this VTR can not
be remote-controlled from the camera.

•Disconnect all cables from the Video Input and

Audio Input Sockets after finishing camera record

ing.
If they remain connected, it is impossible to record
TV programmes.

Preparation
•Connect the Video Camera via the Camera AC Adaptor to

the VTR as shown in the illustration above.

• Insert a video cassette with the erasure prevention tab

intact.

When a video cassette is already inside the VTR, press
the VTR On/Off Switch to turn it on.

•Make sure that the Timer Record Function is set to “Off”.
•Press the VTR/TV Selector to “VTR” position.

^ Turn the Camera AC Adaptor on and make the

necessary adjustments on the camera.
Refer to the operating instructions of the camera you
are using.

0 Press the Record Button (•) on the VTR to start

recording.

—

REC*

REC

Avoid recording unwanted material:

Press the Pause/Still Button

( I I )

of the VTR, and the

recording will stop temporarily. To restart recording, press

the Pause/Still Button

( I I ) ,

again.