Playback by using the remote controller, Super stiti advance playback, Double super fine slow playback – Panasonic NV-D48 Series User Manual
Page 15: Izzi izd cu, Slow tracking control, Reverse playback
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

PLAYBACK BY USING THE REMOTE CONTROLLER
^ Super Stiti Advance Playback
Press the Still Advance Button (!!►) while the VTR is in the
still playback mode. Each time you press this button, the
still-picture will advance one single field.
STILL ADV
!!►
Double Super Fine Slow Playback
During normal playback, the Slow-motion playback can be
activated by pressing the Slow Button. The slow-motion
playback speed can then be varied by using the Slow “ + ”
or Button.
When changing the slow-motion playback
speed, indicator flashes.
-------- SLOW--------I-
IZZI IZD
CU
\
•Press the Play Button {►) to continue the normal
playback.
•If the Slow playback operation continues for more
than 5 minutes, the VTR automatically switches
over to the stop mode.
•While playing back a tape in the Super Still or
Double Super Fine Slow playback mode on a TV set
equipped with an automatic vertical hold control, the
picture may shake vertically. In this case, set the TV
set’s vertical hold (Auto/Manual) selector to the
“Manual” position, and adjust the vertical hold
control.
Slow Tracking Control
•When noise bars appear during Super Still, Super Still
Advance or Double Super Fine Slow playback, switch
over to slow playback and adjust the Slow tracking Control
to reduce the noise bars.
•It may not be possible to eliminate the noise bars
completely.
^ Double Speed Playback
When the VTR is in the playback mode, press the Double
Speed Playback Button to view the action at twice the
normal playback speed. To change back to normal play
back, press the Play Button.
x2
(ZD
X2
© Reverse Playback
When the VTR is in the playback mode, switching over to
Reverse Playback is possible by pressing the Reverse
Playback Button,
•During Reverse Playback, noise bars may appear in the
upper centre and lower centre parts of the picture.
•The sound will be played back only during normal
playback.
• If you leave the VTR in the still playback mode for
more than 5 minutes, the VTR will automatically
switch over to the Stop mode to protect the tape and
the video heads.
•Noise which takes the form of horizontal bars
appears on the TV in the Cue and Review playback
modes. This is not an indication of a malfunction.
•The top of the picture may become distorted in the
Cue, Review, Still, Slow, Double Speed and Re
verse mode. This is not an indication of a malfunc
tion.
•When the picture rolls vertically in the Cue or
Review mode, adjust the vertical hold control on the
TV set.
L.
15