Yamaha SPX90 II - Manual (Page 7)

3. Use PARAMETER IIMCREMENT/DECREMENT
keys to set desired value of the selected parameter.
NOTE: A description of each parameter and its effect
will be given in the DESCRIPTION OF PRO­
GRAMS AND PARAMETERS section, be­
ginning on page 10.
STORE: SAVING EDITED PROGRAMS /
Once you've edited parameters on a preset program,
those changes will remain in effect only until you select
(RECALL) another program. The STORE function,
however, allows you to save the edited program in
any one of the user memory locations—from 31 to
90—from which it can then be recalled at any time.
1. Select and edit a program as described above.
2. Use the MEMORY INCREMENT/DECREMENT
keys to select a clear memory location between 31
and 90.
3. Press the STORE key.
The edited program has now been stored in the selected
user memory location. The stored program may now
be recalled at any time by following the normal program
selection procedure.
NOTE; If you attempt to store a program in one of the
read-only preset locations (1 through 30), the
SPX90II will display the "#1 ~#30 READ
ONLY" error message.
The SPX90II has an Edit Title Function, which
allows you to provide your own titles for edited
programs. (See the UTILITY function on page
8 . )