Panasonic SCAK75 - Manual (Page 25)

Listmmng to tapes
Types of tapes which can be played correctly:
The unit automatically identifies the type of tape.
NORMAL POSITION/TYPE I 0
HIGH POSITION/TYPE II 0
METAL POSITION/TYPE IV o
B
You can use either deck 1 or deck 2 for tape playback.
Press TAPE,
The power will come on automatically.
Press DECK 1 A OPEN or DECK 2 A OPEN
and insert the tape.
Insert the tape with the exposed tape facing down.
Close the holder by hand.
Press REV MODE to select the reverse mode.
Every time you press the button;
"t__
:Z- One side is played, then playback stops automatically.
Both sides (front side-'> reverse side) are played one
time each, then playback stops automatically.
c::^y. Both sides are played 8 times each, then playback stops
automatically.
Press ◄ or ► to start playback.
►: The forward side (front side) will play.
•<: The reverse side will play.
Adjust the volume level.
To stop tape playback
Press ■.
To change the deck to be used El
Press TAPE DECK 1/2 to select the deck you want to use when you
load cassettes into both decks.
To listen to 2 tapes consecutively
Load a tape into each deck and select Both tapes will be
played 8 times each.
0^3
Playback is interrupted while playing back tapes, if you open the
other deck.