Panasonic NV-G21 - Manual (Page 5)

For Everyday Recording
© Turn on the Digital Scanner and trace the "CHANNEL” bar
code.
® Trace the "EVERYDAY" bar code.
r--------------- \
EVERYDAY
1
m
a
__________ _____ j
@ Trace the “START TIME” and then the "END TIME” bar
codes, and transmit the data to the VTR.
•Everyday recording will be performed from that day on.
•If a "DATE” bar code is traced after tracing the "EVERY­
DAY” bar code, everyday recording will not be performed.
For Everyweek Recording
® Turn on the Digital Scanner and trace the “CHANNEL” bar
code.
© Trace the bar code for the desired day of the week among
the "EVERYWEEK” bar codes.
EVERYWEEK
Sunday -
Monday-
Tuesday
Wednesday
Thursday —
Friday-------------
Saturday
□ II
□ II
□ II
I
d
lil 1
□ II
ID MI 1
II□
@ Trace the "START TIME” and then the “END TIME” bar
codes, and transmit the data to the VTR.
•Everyweek recording will be performed from that week on.
•If a "DATE” bar code is traced after tracing the "EVERY­
WEEK'' bar code, everyweek recording will not be
performed.
To Confirm the Programme of a Timer Recording
To perform this operation, the VTR must be turned on or it must
be in the timer recording standby mode (Q indication is lit).
© Trace the “CHECK” bar code.
—
CHECK
------- \
V_______
1 U Tltlllli
__
J
© Perform transmission.
•After releasing the Transmit Button, the programmed data
will be displayed for about 8 seconds (for about 25
seconds, if the Q indication is not tit) on the Multi-Function
Display.
•At every push of the Transmit Button, the timer program­
me number advances to the next higher number.
To Cancel a Programmed Timer Recording
To perform this operation, the VTR must be turned on but not be
in any of the recording or playback operation modes, or it must
be in the timer recording standby mode (Q indication is lit).
To cancel a programmed timer recording, its data must be
displayed on the Multi-Function Display. If they are no longer
displayed, first, trace the "CHECK” bar code and perform
transmission (several times, if necessary, until the programme
you want to cancel is displayed).
Then, within 8 seconds (within 25 seconds, if the [3 indication is
not lit):
© Trace the "CANCEL” bar code.
© Perform transmission.
•To programme a new timer recording, perform the
programming from the beginning.
Cautions
•Treat the Programming Sheet with care. If the sheet gets
dirty or scratched, the bar code reading may become
impossible.
•Protect the Digital Scanner from strong shocks and
vibration. Keep it away from water and places with high
temperature and humidity.