Panasonic NV-G21 - Manual (Page 14)

SETTING THE TUNER IN
THE VTR
The tuner in the VTR makes it possible to receive TV
broadcasts and to record these programmes without having
to turn on the TV set. The reception channels in the TV
bands shown on the right can be received.
1 ^ ^ . - , „ _
w i___ Ч
" f ---- ^
■‘“.Шай*::--
0-5 5 A-11 21-69
__** *'*■-■ ^ * * — — - ■ - ■
1-3 4-11 21-69
•The tuner in the VTR can be preset up to 16 stations.
Preparation
•Turn the TV set on and select the programme position
(channel) which you have tuned to the video playback
channel.
•Press the VTR On/Off Switch to turn the VTR On.
•Set the VTR/TV Selector to “VTR”.
Tuning Procedure
^ Press the PRESET/NORMAL Button.
The indication on the Multi-Function Display changes
from the clock indication to the position indication.
O Press the Channel Up or Down Button to select a
programme position (channel) which you want to tune
to a TV station.
0 Press the BAND/AFC Button to select “I", “III”, or “U”
Position.
Display of the programme positions 1-16
' P o /
E
Indicatidhof the
selected TV band
Selection of the
programme position
O Press the SEARCH (-k) or (-) Button until the picture
of the desired station on your TV is satisfactory.
•If the Search (-k) or (-) Button is pressed while
pressing the Fast Button, the stations will change
quickly.
During the station search
(The position indication
flashes on and off.)
Tuned condition/
When a station is
tuned
I ►
> ! M T n T T f
b - !
viiiimi
i r o -
TUf
) ■' ‘
p 0 .
b : !
•The tuned station is automatically memorized.
Repeat steps ^or each channel you want to tune to a
О PR^ET BAND CLEAR
_ OOO 0®
© NORMAL AFC
0-0 0+1
«ST hu™,bs=l
0 Press the PRESET/NORMAL Button again.
The indication on the Multi-Function Display changes
to the clock indication.
Blanking of Unoccupied Programme Positions
© Press the PRESET/NORMAL Button.
© Press the Channel Up or Down Button to select a
programme position (channel) which you want to tune
to a TV station,
(3) Press the CLEAR Button (“__" will be displayed in the
Programme Position Indication).
•Repeat steps d) and @ for any programme positions
on which no stations are to be tuned. Aftenwards,
these programme positions will be skipped during
Up/Down selection of the programme position on the
VTR.
(4) Press the PRESET/NCRMAL Button again.
Fine Tuning Procedure
If fine tuning is necessary, for example for a weak station
which is close to a strong station:
1. Make sure that the PRESET/NCRMAL Button is in the
Off condition, i.e. the Multi-Function Display shows the
present time.
2. Press the SEARCH “ or Button to obtain the best
tuning condition.
•To return the tuninig to its former state, press the
BAND/AFC Button.