Panasonic NV-F55EA - Manual (Page 31)

Timer Recording (Cont’d)
For Everyweek Recording
For Example:
Programming a timer recording for a TV programme that
is broadcast every \week on Sunday, from 10:30 to 11:45.
Programming for everyweek recording can be made on
any of the timer programme numbers 1-8.
Perform the operation steps 1 to 3.
4 Press the Button repeatediy untii the “SU”
Indicator (^Sunday) is lit.
Perform the operation steps 5 to 13.
For Everyday Recording
For Everyday Recording, you have the choice between 3
different modes: Monday through Friday, Monday through
Saturday, and Sunday through Saturday.
M O T U W E T H F R --------
M O T U W E T H F R S A -
S U M O T U W E THFR SA
For example:
Programme time for timer recording every day from 10:30
to 11:45 on timer programme number 8.
Programming for everyday recording can be made on any
of the timer programme numbers 1-8,
Perform the operation steps 1 to 3.
4 Press the Button until the desired type of
Everyday Recording { 1 , 2 , 3} is displayed.
SP
V 11 É 11 1111 11
m : tl v '.' e t - f ^
T T T 1 M T Ï T T
Perform the operation steps 5 to 13.
To Confirm the Programme of a Timer Recording
Make sure that the VTR is turned on.
Make sure that the Timer Record Function is set to “On”.
Select the programme number to be checked, by
repeatedly pressing the Programme/Check Button.
The preset channel and start and ending times of the timer
recording will be indicated for about 12 seconds.
(start time} (4 seconds)
(end time) (next 8 seconds)
To Cancel a Timer Recording
Make sure that:
the VTR is turned on,
the Timer Record Function is set to “Off”.
1 Press the Programme/Check Button repeatedly, until
the number of the timer programme that you want to
cancel is displayed.
2 Press the Cancel Button.
• During recording, the programme position
(channel) on thé VTR cannot be changed.
•When you want to watch TV after setting a timer
recording, select the desired channel on the TV set.
• To cancel a timer recording during recording, set
the Timer Record Function to “Off”.
• It is impossible to confirm programmes of timer
recordings while an OTR is being performed.
•To turn the VTR on and use it for playback or
recording before the timer recording is performed,
set the Timer Record Function to “Off”.
•When the Timer Record Function is set to “On"
with no video cassette or a video cassette with
broken tab inserted, the “Ba” and “[3’’ indications
will flash. The indication will also flash, when
programming is not completely finished. While it is
flashing, an alarm sound will be produced to
indicate that recording is not possible,
• If a timer recording is not performed to the end (not
enough tape or cancelled by the user), the
programmed timer recording data will be cancelled
from the memory at 4 a.m. two days later.
However, if the Timer Record Function is activated
or an OTR recording is being performed at that
time, the programmed timer recording data will be
cancelled at 4 a.m, the next day.
31