Panasonic NV-F55EA - Manual (Page 22)

Playback (Cont’d)
Noise Filter/Edit Selector
V-LOCK
Digital Tracking
When playback is started after inserting a cassette, and
the VTR is turned on, the Digital Tracking function will be
activated automatically,
•When the tape speed (SP/LP) is changed, the Digital
Tracking function will be activated. However, when
operating any function other than playback, insert editing
and audio dubbing, this function will not work.
• During playback, the Digital Tracking function will be
activated whenever the playback changes over from an
unrecorded part to a recorded part, provided the
recorded part is longer than 4 seconds.
---------- ----- -—--------------- ---- ---- -—
•When the picture is distorted by noise bars, press
the Tracking “ + ” or Button to select manual
tracking and adjust with these two buttons.
To change back to Digital Tracking, press the
Tracking and Buttons simultaneously.
EDIT ON: For editing operations such as dubbing.
OFF: For ordinary use of the VTR.
NOISE FILTER ON: For playback of tapes with inferior
picture quality caused, for example, by repeated dubbing.
^ ^ ^ —
•When the Noise Filter/Edit Selector is set to “EDIT
ON”, the picture sharpness cannot be adjusted
with the Picture Sharpness Control,
Tape Select Switch
To obtain a correct Remaining Tape Time indication when
using an E240 video cassette tape, this switch must be set
to the “E240” position.
When using E30, 60, 90, 120, 180 or 195 video cassette
tapes, set this switch to the “~E195” position.
When using an E260 video cassette tape, set this switch to
the “E260” position.
If cassettes with other tape lengths than the above are
used, the Remaining Tape Time indication will not be
precise.
Vertical Lock Adjustment
If vertical jitter occurs, adjust with the V-Lock or
Button during Still playback.
•When the AC Mains Lead is unplugged or a power failure
occurs, perform the vertical lock adjustment again.
22