Operating the answering device from a remote, Phone (kx-f2781 only), Remote operation card – Panasonic KX-F2781AL User Manual
Page 55: Mailbox remote operation, Recording a message in a mailbox, Retrieving messages from a mailbox, Notice of remote operation, Operating the answering device from a remote phone, Kx-f2781 only)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Operating the answering device from a remote
phone
(KX-F2781 only)
The following operations are availabie from a remote iocation with a touch tone telephone.
Set the unit to the ANS/FAX mode in the AUTO RECEIVE mode before going out (see page 18).
Dial key
Remote command
Page
Dial key
Remote command
Page
m
Repeats a message
58
00
Erases a specific message
58
@
Skips a message
58
@0
Erases all messages
58
0
New message playback
57
00
Turns on message transfer
/pager call for incoming
messages
59
0
All message playback
57
0
Room monitor
58
00
Turns off message transfer
/pager call for incoming
messages
59
0
Re-records a greeting message
59
0
Stops re-recording of a greeting
message
59
0
Skips the greeting message
59
Remote operation card
You may cut out this remote operation card to use.
Mailbox Remote Operation
Recording a message in a
mailbox:
1. Call your unit.
2. Press [*] and the mailbox no.
(liU2)or(3)).
3. Leave a message.
Retrieving messages from a
mailbox:
1. Call your unit.
2. Press @ and the mailbox no.
(Q], BorB).
3. Enter the mailbox password
□m.
4. Press the remote command key
(refer to the reverse side).
Notice of Remote Operation
•The remote operation is available
only from a touch tone phone when
the unit is in the ANS/FAX mode.
•When the unit is in the TEL mode,
call your unit and wait for 15 rings.
The answering system will
temporarily answer the line. Enter the
remote operation ID during the
greeting message.
The unit will switch to the ANS/FAX
mode.
•When you press any key, press
firmly.
•To send a documenf, press (*)[*].
When a fax tone is heard, start
transmission.
55