Warpia SWP700 - Manual (Page 9)

8
4.2 Receiver Connections
l Connect your HD display (LCD, Projector, HDTV etc.)to the Receiver
using an HDMI cable.
l Connect the power interface to the power adaptor(5V 3A) to power supply.
5. WHDI Remote Control Instructions
5.1 Register or Add
l Connect StreamEZ Transmitter and Receiver to source equipment and display equipment
separately.
l Pointing WHDI Remote Control at the Receiver, Press "Menu" or "Add"; choose "Add
video source" in "Setup" interface
l "Activate registration of video transmitter unit" should now show on the display screen
l Press Register button on StreamEZ transmitter for approx 1 second. Status LED will flicker/
l The TV/Projector will reveal confirmation of successful connection
l Use WHDI Remote Control to press OK
l The registration state will be revealed on the display screen
l After about 30 seconds the registration process finishes
l Network will be connected automatically and transmit audio and video signals after
registration.
l Up to 8 transmitters can be added with the above procedure
5.2 Delete Transmitters
l Press "Source" to check the Transmitter